Raspberry Pi setup

Bake OS

For this project you can also use a 32-bit system it doesn't matter to be honest

Download the Raspberry Pi imager from https://www.raspberrypi.com/software/ and install write the OS on your SD card.

1. Select: Raspberry Pi OS Lite (64-bit) 

2. Select the SD card as Storage device

3. Define the hostname and enable SSH

4. Enter your credentials which you want to login later

5. If you are not via LAN connected you can configure the Wifi as well in the setting.

6. Execute it! After that stick the SD card into the Raspberry Pi and power it on.

Connect via SSH

Windows

Download https://www.advanced-ip-scanner.com/de/ and scan your network. You'll see the IP address and hostname.

Connect with putty https://www.putty.org/ or use WSL (Windows Subsystem for Linux) https://docs.microsoft.com/de-de/windows/wsl/install

Enter ssh username@192.168.1.222 and provide your password

MAC / Linux

Open the terminal and scan the network with NMAP.

nmap -sn 192.168.1.0/24

Then enter ssh username@192.168.1.222 and provide your password